LiveView Waveform Settings

A place to discuss your Kinefinity workflow.
Post Reply
User avatar
Arooj Azam
Posts: 10
Joined: Mon Aug 25, 2014 5:39 pm

Sat Aug 30, 2014 8:09 pm

Direct Answers from Kinefinity

Waveform monitor settings as:

Post means Linear RAW (Original) + LOG+ LUT;
RGB means R, G, B channel if Linear RAW or Data processed as Post;

1. RAW RGB; Original Linear RAW from Sensor, so waveform of RAW RGB or luma shows relatively low; 20~30% is OK for most cases; If RAW RGB/luma exceeds 100%, it must be overexposed.
2. Post RGB; Linear RAW from sensor, logged then load LUT to resemble final grading output. So waveform of Post RGB/luma shows normal image which is supposed to be close to final output. For most cases, 70~80% of waveform is OK. Note: if waveform exceeds 100%, that does not mean overexposed.
3. RAW luma;
4. Post luma;

Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 1 guest